How To Apply Contact Paper To Cabinets

Press the edge of the paper along the top of the cabinet.

How to apply contact paper to cabinets. Simultaneously press the plastic card against the cabinet and push downward inch by inch starting from the center to smooth out the bubbles before you unroll more paper. Just roll out the contact paper so that it covers the entire area including the edges with an extra inch or two at the ends. Cut a 2 block strip.

Cut off the excess paper with scissors. You can use the lines on the back to help get a straight cut but I just eyeballed it with the edge of the roll as a guide. Gently peel away the backing and smooth the contact paper into place within the drawer cutting away any overlapping pieces of paper.

Crease any extra at the front of the drawer. Apply the Contact Paper But Do So Slowly Peel away part of the backing and start at the top of the drawer. Remove paper from drawer and cut on fold.

Run your finger along the edge of the paper so it attaches evenly. When the 2 edges are even press the paper down. Hold the edge of the paper up to the very top of the cabinet.

Its easiest to apply this marble contact paper with two people if possible. To line a drawer with contact paper use removable contact paper that is measured to fit the drawer. Peel the back of the contact paper away and line it up as perfectly as possible with the edges of the countertop before sticking it down.

Press the exposed adhesive 14-inch section of the contact paper against the surface you wish to cover using the fingertips of one hand. Steps for contact paper file cabinet redo. Use the pointed end of the screw to gently pierce the paper for screws that insert from the same side as the paper is on.