How To Build A Cheap Raised Deck
Footing and Post Layout DIY Inexpensive Deck Plans The footings support the posts which support the beams which support the rest of the framing.
How to build a cheap raised deck. From one side of the stairs to the other is a 10 12-inch slope. Measure and indicate all door locations stairs as well as the placement of existing obstructions such as chimneys and trees. Measure measure and measure again to ensure your deck is good and level.
After you have laid the EPDM sheet simply lay a new deck surface using modular wood deck tiles or 34 thick porcelain pavers. Remember the plywood that will cover this will raise the height another 34 of an inch. Raised decks require a railing around the perimeter and they require a building permit.
Stairs are a costly addition to a deck so consider that adding them will increase the overall cost. They built a gorgeous deck by using only pallet boards concrete blocks sand gravel and stain. Most decks require a wide array of hardware such as hanger brackets and special screws.
12 x 12 DIY Inexpensive Deck Plans Fig 1. Indicate the main wall the portion attached to the house and the orientation of the deck boards. Adding stairs to a second-story deck will increase the cost by about 1500 on average.
Make sure also that the surface of the deck has no protruding nail or screw heads or splinters that could puncture the EPDM membrane. Decks that are a story off the ground need a larger set of stairs and longer posts than a deck that is near the ground. Use a post level to keep the posts plumb and your mason lines to position them correctly.
The average homeowner spends 2200 to build a 10x10 foot deck 6160 to build a 14x20 deck and 8800 to build a 20x20 deck. Now on to a raised deck. This was the second decking area I built in my garden.