How To Do A Patio Roof

Make sure you offset yo.

How to do a patio roof. Patio roof connects to a ledger that firmly attaches to house framing. An insulated aluminum patio roof uses aluminum-clad foam panels. Indicate this point with a 10-foot beam.

This is a long video but it will show you how to do it. A pan roof has a less-finished look with the pan roof. Though it doesnt appear nearly as often as wood aluminum canvas or fabric counterparts the glass is still a perfectly viable material for a patio roof.

Then caulk the nail heads. I had to cut an angle and a 12 notch at the top ends so the roof of the patio cover would come in below the houses drip edge. Prepare the joists.

It will let you add around a 100 mm of additional height or more. If the house is sided with shingles or lap siding simply slip the metals top edge up under the bottom edge of the shingles or siding as far as possible. This is the construction and installation of the roof frame which can be done with premade trusses.

Make the roof higher. And tie it into your hip roof. Use the post digger to dig holes on both of the front sides of the patio.

You will have to take out the house gutter and put the back channel slightly higher so you can make the patio roof higher. I then cut off seven inches from the other end at an angle so it would match up to the frames header at the far end. This is the layer of material that goes on top of the frame and provides the surface of the roof.